High Pressure Ball Valves India
Pneumatics Valves Our ProductsManual ValveHigh Pressure Ball Valve

JEKON MAKE HIGH PRESSURE BALL VALVE

 
Specification
MAKE JEKON
MODEL JHPBV
SIZE RANGE 1 /4",3/8",1 /2",3/4"
1".1.1/2" & 2" BSP/NPT
BODY FORGED S.S./C.S.
PRESSURE 200KG & 500KG/cm2
TEMPERATURE 80°C
MEDIA AIR, WATER, OIL & GAS
High Pressure Ball Valve
 

Ball Valve Manufacturers

We are leading Ball Valve Manufacturers in India. A ball valve is a form of quarter-turn valve which used a hallow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.

These valves allow for shut-off and/or purposes of control. They have a round closure element that contains a matching pair of rounded seats. These seats allow necessary sealing to take place. If the valve is opened, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. If the valve is closed, the ball is rotated so that the hole is perpendicular to the flow openings of the valve body and the flow is stopped.

Ball valves applications

The following are some distinctive applications of Ball valves:

  • Air, gaseous, and liquid applications
  • Drains and vents in liquid, gaseous, and other fluid services
  • Steam service
Advantages of Ball valves
  • Quick quarter turn on-off operation
  • Tight sealing with low torque
  • Smaller in size than most other valves
Disadvantages of Ball valves
  • Conventional Ball valves have poor throttling properties
  • In slurry or other applications, the suspended particles can settle and become trapped in body cavities causing wear, leakage, or valve failure.
Our Products
 
Make Enquiry
 
Powered by : #1 Vinayak InfoSoft All Copyrights © 2015. Jekon Control